DOWNLOAD THE USER MANUAL

Please open and download the PDF below to access the user guide.

IMPORTANT: 

Remove all plastic wrapping from the unit and accessories before first use.

1.  Inspect all components by checking the main unit, charging port, dust cup, and filter to ensure they are free from any visible damage.

2.  Allow the vacuum to charge fully before first operation to ensure optimum performance.

3.  Insert the filter securely into the dust cup and twist the dust cup ⟳ (clockwise) back onto the main unit until properly locked.

4. Connect the desired attachment securely before switching on.

5. Press the Power Button once to Power On.

Ensure you maintain a steady grip on the vacuum

👉 Holding it close to the centre of the body for better control

HOW TO POWER ON

Press the power button once to switch on the vacuum.

◉ Press the power button again to activate the second suction level.

◉ Once powered on, you will hear the motor sound indicating that the vacuum is ready to use

Follow the step-by-step guide shown in the video for complete instructions.

IMPORTANT: 

Connect the desired attachment securely before switching on.

Attach the long suction nozzle securely.

This attachment is perfect for reaching edges and corners that are difficult to access with standard brushes.

Ideal for picking up paper pieces, crumbs, dust, and fine debris from confined areas

The narrow tip concentrates airflow, providing stronger suction power for targeted dirt removal.

Attach the suction nozzle brush securely to the vacuum.

This is ideal for cleaning car mats, fabric surfaces, and floor corners, keyboards, vents, and other delicate areas to remove fine dust without scratching.

The Strongcore GO Mini Vacuum is designed with two versatile functions.

One end provides powerful suction, while the opposite end features a blowing mode that helps clear hard-to-reach areas or remove loose particles effectively.

Attach the short blowing tube to remove dust from keyboards, vents, and other areas where particles settle deeply.

Connect the blowing brush to help lift and disperse stubborn dust from textured surfaces.

Use the long blowing tube securely to extend reach when blowing dust out of narrow areas.

Ideal for clearing dirt from tight spaces such as car exteriors and interiors, vents, and hard-to-reach corners.

The blowing tube can also be used for inflating small items, such as storage bags or lightweight inflatable products.

Follow the step-by-step guide shown in the video for complete instructions.

IMPORTANT: 

The flashlight is located on the blowing end of the vacuum. It must be used without any blowing attachment fitted.

The Strongcore GO is equipped with a built-in LED flashlight for added convenience.

Press the flashlight button to switch the light ON or OFF.

Ideal for illuminating dark or hard-to-see areas while cleaning, such as corners, and under furniture.

Follow the step-by-step guide shown in the video for complete instructions.

IMPORTANT: 

The Strongcore Go Mini Vacuum supports multiple charging options that provides convenience wherever you are.

Wall Socket - Use a 5V adapter for best results.

Car Port Charging

Power Bank Charging

Laptop Charging

You will see red battery indicator light confirming the unit is properly charging and green light when fully charged.

Follow the step-by-step guide shown in the video for complete instructions.

IMPORTANT: 

Charge the vacuum fully before first use for optimal performance.

If the vacuum does not power on, the battery may be fully drained — recharge it before use.

Charging time should not exceed 2 hours.

A full charge ensures continuous and efficient cleaning.

ADVICE

If the Vacuum doesn’t operate after following the steps above, please contact our support team at  www.strongcore.sg/contact.

IMPORTANT: 

Inspect the main unit, including the charging port, buttons, and vacuum vent, to ensure everything is clean and free from obstruction.

Check the dust cup and filter for any remaining dirt or debris.

Follow the step-by-step guide shown in the video for complete instructions.

ADVICE

If the Vacuum doesn’t operate after following the steps above, please contact our support team at www.strongcore.sg/contact.

IMPORTANT: 

Unusual noise often indicates a blockage or dirty filter. Addressing this promptly prevents damage and restores proper airflow.

Check the suction path and nozzles for trapped debris.

Remove any blockages and dirt from the filter using a brush to restore smooth operation.

Reinsert the clean filter into the dust cup.

Restart the vacuum to resume normal operation.

Follow the step-by-step guide shown in the video for complete instructions.

ADVICE

If the Vacuum doesn’t operate after following the steps above, please contact our support team at www.strongcore.sg/contact.

IMPORTANT: 

Overheating usually occurs when airflow is restricted or the vacuum is used continuously for an extended period.

◉ If your vacuum stopped unexpectedly, It may have overheated.

◉ Turn off the vacuum and let it cool for 30–60 minutes before using it again.

Follow the step-by-step guide shown in the video for complete instructions.

ADVICE

If the Vacuum doesn’t operate after following the steps above, please contact our support team at www.strongcore.sg/contact.

IMPORTANT: 

Before detaching, always switch off and unplug the vacuum. Handle all parts gently to avoid damage during disassembly.

Always disconnect the plug from the power source before disassembly.

Twist to open and remove the dust cup.

Empty all collected dirt and debris into a bin.

Follow the step-by-step guide shown in the video for complete instructions.

IMPORTANT:

Regular cleaning keeps your vacuum performing at its best and extends the lifespan of its attachments.Rinse all the vacuum attachments under running water.

For the filter, use a soft brush to gently remove remaining dust and fine particles.

Rinse the Long suction nozzle, Suction Nozzle Brush,Blowing Brush, Short blowing tube, Long blowing tube and Dust cup to clear any trapped dust and ensure smooth air passage for both suction and blowing.

Follow the step-by-step guide shown in the video for complete instructions.

IMPORTANT:

Regular cleaning helps maintain optimal suction power and prolongs product lifespan.

◉ Let all parts air dry completely overnight before reassembly.

◉ Never reattach wet components.

Follow the step-by-step guide shown in the video for complete instructions.

IMPORTANT:

To avoid potential motor damage, ensure that the filters are completely dry before putting them back in the motor unit.

The Strongcore GO Mini Vacuum features a compact, lightweight design, making it easy to carry and store anywhere.

You can conveniently place it on the side of your car seat for quick access during travel.

Inside car storage compartments for organised and clutter-free keeping.

The pouch also fits easily inside backpacks, handbags, or travel bags — perfect for on-the-go use.

Follow the step-by-step guide shown in the video for complete instructions.