DOWNLOAD THE USER MANUAL

Please open and download the PDF below to access the user guide.

IMPORTANT:

Before first use, please ensure to remove all protective packaging materials, including plastic wraps and protective cardboards.

◉ Fill the measuring cup with clean water maximum 100ml.
◉ The steamer’s water tank holds up to 170ml.

1. Place the electric kettle on a stable, flat, and heat-resistant surface, leaving enough space around the unit for safe use.

2. Remove all protective packaging materials, including plastic wraps, foam inserts, and cardboard supports.

3. Position the kettle securely on its power base, ensuring it sits correctly and is properly aligned.

4. Fill the kettle with clean water, making sure the water level is between the MIN and MAX markings.

5. Plug the power base into a dedicated mains socket (220–240V).

6. Press the Power Switch to turn the kettle ON

IMPORTANT:

Always open the lid carefully, as hot steam may escape after boiling.

To open the kettle, gently press the One-Touch Lid Opening - release and lift the lid upwards using the handle.

When closing, gently push to lower the lid firmly until it clicks securely into place.

IMPORTANT: 

Make sure the kettle is correctly positioned on the power base before use. Keep the base on a dry, stable surface and never move the kettle during boiling.

Lift the kettle using the handle and carefully remove it from the power base when pouring.

To place it back, align the kettle body with the centre of the power base and lower it gently into position.

Always place the power base on a dry, stable, and heat-resistant surface.

Never move the kettle or lift it off the base while it is boiling.

IMPORTANT: 

Do not plug in or switch on the kettle until it is filled with water.

◉ Press the Power Switch to turn the kettle ON.

◉ The kettle will switch off automatically once boiling is finished.

To turn off the kettle manually, simply flip the power switch back to the OFF position to stop the operation.

IMPORTANT: 

Always ensure the kettle contains water before switching it on.

Fill the kettle with clean water

Ensure it does not exceed the MAX 1.7L level mark.

Close the lid securely before heating.

Place the kettle body onto the power base, making sure it sits flat and aligned properly.

Plug into a designated wall socket.

Next press the Power Switch to turn ON.

IMPORTANT: 

Always keep the power base dry and use the kettle on a stable surface.

With a 1.7L capacity, the Minute Electric Kettle can boil enough water for up to 8 cups in one use.

The kettle also features a heat-resistant exterior, helping the outer surface stay safer to touch during operation.

Double-wall insulation helps retain heat for longer while keeping the outside cooler and more comfortable to handle.

IMPORTANT:

Do not use the kettle if the cord or plug is damaged. Ensure the plug is securely connected to a working wall socket before use.

Inspect the plug and ensure that it is firmly connected to a working wall socket.

◉ Check that the kettle body is placed correctly on the power base

◉ Press the Power Switch to turn the unit ON.

ADVICE:

If the Electric Kettle doesn’t operate after following the steps above, please contact our support team at www.strongcore.sg/contact

IMPORTANT:

Never heat the kettle without water, as this may trigger automatic shut-off.

The kettle may have activated safety protection due to overheating.

Allow the unit to cool down for at least 15–30 minutes before restarting.

Ensure there is enough water inside and the kettle is not boiling dry

ADVICE:

If the Electric Kettle doesn’t operate after following the steps above, please contact our support team at www.strongcore.sg/contact

IMPORTANT:

Always keep the touch panel dry for safe operation.

First, make sure the kettle is plugged in properly.

Try another outlet to confirm the socket is working

Make sure the kettle is seated correctly on the base. Reposition the kettle until it sits flat and stable.

Check the water level. Make sure there is enough water inside the kettle. If the water is below the minimum line, the kettle may not heat.

ADVICE:

If the Electric Kettle doesn’t operate after following the steps above, please contact our support team at www.strongcore.sg/contact

IMPORTANT:

Regular descaling helps prevent mineral build-up and odour. If the smell is still strong, stop using the kettle and contact customer support.

Copy of Smoke or unusual odours may occur if grease builds up in the fryer basket or airflow is restricted. Always ensure the basket is clean and air vents are unobstructed before cooking.

REMINDER:

A slight smell during first use is normal and will fade after a few boils.

Copy of Smoke or unusual odours may occur if grease builds up in the fryer basket or airflow is restricted. Always ensure the basket is clean and air vents are unobstructed before cooking.

Empty the kettle.

Rinse the inside part.

Add water.

Boil clean water once or twice. Depends if the unusual odour persists.

ADVICE:

If the Electric Kettle doesn’t operate after following the steps above, please contact our support team at www.strongcore.sg/contact

IMPORTANT:

Never immerse the kettle body, power base, or cord in water. Do not use abrasive pads or harsh cleaners, as they may damage the stainless steel interior.

After using the kettle, unplug and allow it to cool down before cleaning.

Add a small amount of clean water inside the kettle.

Gently clean the interior using a soft sponge.

Carefully pour out the water.

Rinse the inside thoroughly.

Wipe the interior surface with a clean, damp cloth to remove fingerprints or water marks.

IMPORTANT:

Regular cleaning and descaling help extend the life of your kettle and ensure safe, efficient performance.

After using the kettle, unplug and allow it to cool down before cleaning.

Pour 400 ml of water and 200 ml of white vinegar into the kettle.

Power ON the unit and bring the solution to 100°C full boil.

IMPORTANT:

Regular cleaning and descaling help extend the life of your kettle and ensure safe, efficient performance.

Carefully pour out the mixture once the soaking is complete.

Refill the kettle with clean water up to the MAX 1.7L level.

Boil again to 100°C for easy cleanup and rinsing.

Empty the kettle and let it cool down.

Wipe the inside gently to remove any remaining residue.

IMPORTANT:

Regular cleaning and descaling help extend the life of your kettle and ensure safe, efficient performance.

The Minute Electric Kettle includes a built-in cord organiser at the rear of the power base for neat and convenient storage.