DOWNLOAD THE USER MANUAL

Please open and download the PDF below to access the user guide.

IMPORTANT

Before first use, please ensure to remove all protective packaging materials, including plastic wraps and protective cardboards.

◉ Fill the measuring cup with clean water maximum 100ml.
◉ The steamer’s water tank holds up to 170ml.

1. Remove the blender from the box and take out all packaging materials inside.

2.Place the Blender Motor Base on a stable, flat surface.

3. Attach the Blade Base to the Blending Cup by twisting to lock securely.

4. Place the Blending Cup onto the Motor Base and twist clockwise until securely locked.

5. Plug into a 220V power socket.

6. Run the unit empty for 10 seconds before first use to confirm proper operation.

CAUTION:

Ensure the blender is unplugged before assembling any parts. Always handle blades with care — the edges are extremely sharp and may cause injury.

Attach the blending cup to the motor base and tighten firmly clockwise before placing onto the Motor Base.

IMPORTANT: 

- Do not overload the blending cup — this may stall the motor.
- Never operate continuously for more than 60 seconds to prevent    overheating.
- Cut all ingredients into 2–3 cm pieces for best results.

1. Inspect the plug before use.

2. Always plug into a dedicated 220–240V power outlet.

3. Run the unit empty for 10 seconds before first use to confirm proper operation.

4. Cut all ingredients into 2–3 cm pieces for best results.

5. Add your solid ingredients first, then pour in your liquid. Do not exceed 700ml.

6. Attach the Blade Base to the Blending Cup and tighten firmly clockwise before placing onto the Motor Base.

IMPORTANT: 

 - Do not overload the blending jar — this may stall the motor.
- Never operate continuously for more than 60 seconds to prevent overheating.
- Cut all ingredients into 2–3 cm pieces for best results.

1. Align the Blending Cup to the Motor Base and twist clockwise until you hear a click — this confirms it is securely locked.

2. Press and hold the Blending Cup to start.

IMPORTANT: 

Do not exceed the recommended maximum quantities for each ingredient. Overloading the 700ml blending cup capacity may cause the motor to stall or result in uneven blending.

IMPORTANT:

- If the unit fails to operate, do not force to operate the blender.
- Check all connections and ensure the blending cup is properly attached to the motor base before restarting
.- Add liquid ingredient (e.g., water, milk, or oil) to help the blending process.

1. Re-align the Blending Cup to the Motor Base and twist clockwise until securely locked.

2. Inspect the plug and ensure the power cord is fully inserted into a dedicated 220–240V socket.

3. Add a small amount of liquid to assist the blending process.

4. Once all connections are secure, restart the unit.

ADVISE

If the Blender doesn’t operate after following the steps above, please contact our support team at 
www.strongcore.sg/contact

IMPORTANT:

Never use the Blender on these hard or unsuitable ingredients: These are strictly not recommended.

◉ Ice Cubes

◉ Chocolate Bars

◉ Coffee Beans

◉ Hard Spices

1. The Blending Cup may be overloaded, causing the motor to stall.

2. Allow the motor to cool for a minimum of 20 minutes before restarting.

3. Arrange the ingredients and ensure the total load does not exceed 700ml.

4. Add a small amount of liquid to assist the blending process.

5. Once adjusted, reassemble and restart the unit.

ADVISE

If the Blender doesn’t operate after following the steps above, please contact our support team at
www.strongcore.sg/contact

IMPORTANT:

If the blending performance is poor, switch off and unplug the unit immediately. Do not force the motor — check ingredient size and blade cleanliness before restarting.

1. Overloading the Blending Cup may cause uneven results or motor stall.

2. Always add liquid with your solid ingredients to assist blending.

3. Cut all ingredients into 2–3 cm before loading.

4. Once adjusted, reassemble and restart the unit. 

ADVICE

If the Blender doesn’t operate after following the steps above, please contact our support team at
www.strongcore.sg/contact

IMPORTANT:

If leakage occurs, switch off and unplug the unit immediately. Do not continue operating until is properly checked reassembled.

Copy of Smoke or unusual odours may occur if grease builds up in the fryer basket or airflow is restricted. Always ensure the basket is clean and air vents are unobstructed before cooking.

1. The Blending Cup may be overloaded.

2. Arrange the ingredients and ensure the total load does not exceed 700ml.

3. Check the alignment of the Blending Cup to the Motor Base and twist clockwise until firmly locked.

4. Restart the unit.

ADVISE

If the Blender doesn’t operate after following the steps above, please contact our support team at
www.strongcore.sg/contact

IMPORTANT:

Never operate the unit continuously for more than 60 seconds. Always allow the motor to cool fully between grinding cycles to prevent overheating.

Copy of Copy of Smoke or unusual odours may occur if grease builds up in the fryer basket or airflow is restricted. Always ensure the basket is clean and air vents are unobstructed before cooking.

The motor unit may have overheated due to prolonged operation beyond the recommended duty cycle.

1. The motor unit may have overheated due to prolonged operation beyond the recommended duty cycle.

2. Disassemble and allow the motor to cool fully in a well-ventilated area for a minimum of 30 minutes.

3. Wipe the motor air vents with a lightly dampened cloth. Keep moisture away from the vents.

4. Do not operate continuously for more than 60 seconds; always allow full cooling between blending cycles.

ADVISE

If the Blender doesn’t operate after following the steps above, please contact our support team at www.strongcore.sg/contact