DOWNLOAD THE USER MANUAL

Please open and download the PDF below to access the user guide.

IMPORTANT: 

Before first use, please ensure to remove all protective packaging materials, including plastic wraps and protective cardboards.

1. Ensure the blender is placed on a stable, flat surface during setup and operation.

2. Unbox all components — blender unit, USB-C charging cable, silicone sleeve, and cleaning brush.

3. Charge the blender fully using the provided USB-C cable. A steady blue light indicates full charge.

4. Assemble the unit by aligning the glass cup with the motor base and locking it securely.

CAUTION: 

Before using your blender, make sure it’s switched off and unplugged from the charging cable. Handle the motor base and blades carefully, never touch the blades directly to avoid injury.

Pour in the liquid first, followed by soft ingredients and a few ice cubes.

💡 Tip: This helps the blades rotate smoothly for better blending into the glass cup.

Important: 

Do not exceed 100 ml of liquid.

Align the motor base securely with the glass cup before turning it on.

Press the Power Button twice to start blending.

Use the stainless steel straw for smooth, eco-friendly sipping on the go.

Compact and travel-friendly. Ideal for outdoor use or workouts.

Easily carry in your bag — perfect for travel, work, or daily commutes.

Easy carry using the silicone strap for secure grip.

IMPORTANT: 

Always check the charging connection first — most power issues are caused by loose or dusty ports.

Check the charging port for any dust or debris that might block the connection.

Inspect the cable for any visible damage or bent connectors.

Ensure the charging cable is properly plugged into the charging port.

To confirm that the unit is charging, you will see three battery indicator lights showing the current battery level.

ADVICE

If the Blender doesn’t operate after following the steps above, please contact our support team at www.strongcore.sg/contact.

REMINDER:

Your blender will not operate if the motor base and glass cup are not properly aligned.

Before pressing the power button, make sure both parts are securely locked in place.

Ensure the motor base is properly aligned with the glass cup.

Once both parts are correctly attached, press the Power Button twice to begin blending.

ADVICE

If the Blender doesn’t operate after following the steps above, please contact our support team at www.strongcore.sg/contact.

IMPORTANT: 

For safety and best performance, always allow the blender to charge fully before restarting.

When the blue light flashes, it means the battery is running low.

Plug in the charging cable to start charging the blender.

When the light turns steady, it means charging has started successfully.

When all three blue lights appear, your blender is fully charged and ready for use again.

ADVICE

ADVICE: If the Blender doesn’t operate after following the steps above, please contact our support team at www.strongcore.sg/contact.

IMPORTANT: 

To prevent blades from getting stuck, cut ingredients into smaller pieces before blending.

Avoid overfilling the cup with thick or fibrous foods.

When the blue light flashes, it means the battery is running low.

Plug in the charging cable to start charging the blender.

When the light turns steady, it means charging has started successfully.

Once the ingredients are loosened, turn the blender on again to resume blending.

ADVICE

ADVICE: If the Blender doesn’t operate after following the steps above, please contact our support team at www.strongcore.sg/contact.

IMPORTANT: 

After each use, always turn off the power and unplug the blender before cleaning.

Before cleaning, unplug the charging cable from the motor base charging port and socket.

Ensure the silicone cover is securely closed over the charging port to prevent water from entering the motor base.

Add water and a small amount of liquid soap into the glass cup.

Reattach the motor base securely and make sure it’s properly aligned.

CAUTION: 

Do not immerse the motor base in water, as this may cause malfunction or corrosion.

💡Always keep the charging port area dry.

Attach the motor base securely and ensure it’s properly aligned.

Press the Power Button twice to let the blender run for a few seconds.

Rinse the motor base, glass cup, and silicone sleeve under running water.

IMPORTANT: 

Ensure all parts are completely dry before reassembling.

Moisture can affect the motor’s performance.

Store your blender in a cool, dry place to keep the motor and blades in good condition.