DOWNLOAD THE USER MANUAL

Please open and download the PDF below to access the user guide.

IMPORTANT:

Before first use, please ensure to remove all protective packaging materials, including plastic wraps and protective cardboards.

◉ Fill the measuring cup with clean water maximum 100ml.
◉ The steamer’s water tank holds up to 170ml.

1. Place the digital kettle on a stable, flat, and heat-resistant surface, leaving enough space around the unit for safe use.

2. Remove all protective packaging materials, including plastic wraps, foam inserts, and cardboard supports.

3. Position the kettle securely on its power base, ensuring it sits correctly and is properly aligned.

4. Fill the kettle with clean water, making sure the water level is between the MIN and MAX markings.

5. Plug the power base into a dedicated mains socket (220–240V).

6. The control panel will illuminate,  indicating the unit is ready for operation.

IMPORTANT:

Always open the lid carefully, as hot steam may escape after boiling.

To open the kettle, gently press the One-Touch Lid Opening - release and lift the lid upwards using the handle.

When closing, gently push to lower the lid firmly until it clicks securely into place.

IMPORTANT: 

Always place the power base on a dry, stable, and heat-resistant surface. Never move the kettle or lift it off the base while it is boiling.

Lift the kettle using the handle and carefully remove it from the power base when pouring.

To place it back, align the kettle body with the centre of the power base and lower it gently into position.

IMPORTANT: 

Always ensure the kettle contains water before switching it on. Do not operate the unit while empty, as this may cause overheating or damage.

Press the Power button to switch the kettle on

IMPORTANT: 

Keep Warm Mode is designed for short-term temperature maintenance only — always switch off and unplug the kettle when not in use.

◉ Use the Increase (+) or Decrease (–) controls to adjust the temperature manually as needed.

◉  The digital display will confirm your selected setting for accurate heating.

The Right Digital Kettle features Keep Warm Mode. Simply select the chosen preset menu setting and the kettle will hold the temperature for up to 2 hours and will reheat automatically if it drops 5°C below your chosen setting.

Press the power button to switch the kettle OFF after use

IMPORTANT: 

Do not fill the kettle above the MAX 1.7 L water level. Overfilling may cause boiling water to spill and create a burn hazard.

Fill the kettle with clean water.

Ensure it does not exceed the MAX 1.7L level mark.

Place the kettle body onto the power base, making sure it sits flat and aligned properly.

Press the Power Button to switch ON

IMPORTANT: 

Always keep the power base dry and use the kettle on a stable surface.

With a 1.7L capacity, the Right Digital Kettle can boil enough water for up to 8 cups in one use — ideal for families or guests.

The kettle also features a heat-resistant exterior, helping the outer surface stay safer to touch during operation

The double-wall insulation helps retain heat for longer while keeping the outside cooler and more comfortable to handle.

IMPORTANT:

Do not use the kettle if the cord or plug is damaged. Ensure the plug is securely connected to a working wall socket before use.

Inspect the plug and ensure that it is firmly connected to a working wall socket.

Check that the kettle body is placed correctly on the power base.

Press the Power button once to switch the unit ON.

IMPORTANT:

Check the food halfway through cooking to ensure it is evenly cooked.

The kettle may have activated safety protection due to overheating.

Allow the unit to cool down for at least 15–30 minutes before restarting.

Ensure there is enough water inside and the kettle is not boiling dry. Follow the Max 1.7L water level.

IMPORTANT:

Always keep the touch panel dry for safe operation.

◉ Make sure the control panel is clean and completely dry.

◉ Use a light touch — avoid pressing with wet hands or excessive force.

Ensure the kettle is properly placed on the power base and receiving power.

Unplug the unit for a few seconds, then plug it back in and try again.

IMPORTANT:

Regular descaling helps prevent mineral build-up and odour. If the smell is still strong, stop using the kettle and contact customer support.

Copy of Smoke or unusual odours may occur if grease builds up in the fryer basket or airflow is restricted. Always ensure the basket is clean and air vents are unobstructed before cooking.

REMINDER:

A slight smell during first use is normal and will fade after a few boils.

Copy of Smoke or unusual odours may occur if grease builds up in the fryer basket or airflow is restricted. Always ensure the basket is clean and air vents are unobstructed before cooking.

Empty the kettle.

Rinse the inside part and add water.

Refill the kettle with water. Following the Max 1.7L level.

Boil once or twice. Depends if the unusual odour persists.

IMPORTANT:

Never immerse the kettle body, power base, or cord in water. Do not use abrasive pads or harsh cleaners, as they may damage the stainless steel interior.

Unplug the kettle after using.

Add a small amount of clean water inside the kettle.

Gently clean the interior using a soft sponge.

Pour out the water.

Rinse the inside thoroughly.

Wipe the exterior surface with a clean, damp cloth to remove fingerprints or water marks.

IMPORTANT:

Regular cleaning and descaling help extend the life of your kettle and ensure safe, efficient performance.

Unplug the kettle after using.

Pour 400 ml of water and 200 ml of white vinegar into the kettle.

Power ON the unit and bring the solution to 100°C full boil.

After boiling, leave the solution inside the kettle for up to 12 hours to loosen limescale buildup.

IMPORTANT:

Ensure the air fryer is unplugged and fully cooled before cleaning. Never submerge the main unit in water.

Pour out the water.

Refill the kettle with clean water up to the MAX 1.7L level.

Power ON and boil again to 100°C to rinse.

Empty the kettle.

Then wipe the inside gently to remove any remaining residue.

IMPORTANT:

Regular cleaning and descaling help extend the life of your kettle and ensure safe, efficient performance.

The Right Digital Kettle includes a built-in cord organiser at the rear of the power base for neat and convenient storage.

Store or place your digital kettle on a dry, flat, and stable surface.Ensure the unit is completely dry before storing.