DOWNLOAD THE USER MANUAL

Please open and download the PDF below to access the user guide.

IMPORTANT: 

Remove all plastic wrapping from the motor unit and accessories before first use.

◉ Insert the lanyard string through the lanyard hole on the fan.
◉ Pull it through and secure. Now you can enjoy hands-free carrying anytime.

IMPORTANT: 

Fully charge your portable fan for about 4 hours before first use to ensure optimal battery performance.

Slide the Power Button upward (located at the back of the unit) to switch on the fan.

The display screen will light up, showing the current battery percentage.

IMPORTANT:

Fully charge your portable fan for about 4 hours before first use to ensure optimal battery performance.

STEP 1:
Press the “+” button once to turn on the fan at Speed Level 1.

STEP 2:
Press the “+” button again to increase the speed (25 → 50 → 75 → 100).

STEP 3:
Press and hold the “+” button again to gradually adjust from Speed Level 1 up to Speed Level 100.

STEP 4:
Release the button to set and maintain your desired speed.

Press the “–” button twice to stop the fan motor.

Slide the Power Button downward (located at the back of the unit) to fully switch off the fan.

IMPORTANT: 

Charging Options

You can charge your portable fan with the USB-C cable by connecting it to:

1. Laptop USB port – ensure the laptop is powered on (not in sleep moade).
2. Fully charged Power Bank
3. Car charger (12V socket)

Plug in the USB-C cable to the charging port.

The display screen will light up and show the charging progress.

✅ Check 1

Make sure the power switch at the back of the unit is set to ON.

✅ Check 2

Inspect the USB-C cable and charging port for any visible damage.

✅ Check 3

Ensure the battery is charged. Plug the fan in if the battery is low.

ADVICE

If your portable fan still doesn’t power on after following the steps above, please contact our support team at www.strongcore.sg/contact.

IMPORTANT: 

For safe and reliable charging, always use the original USB-C cable provided with your fan.

✅ Check 1

If no battery level shows on the display screen, try a different power source (e.g., laptop, power bank, or another wall outlet).

✅ Check 2

Use a 5V adapter for best charging results.

✅ Check 3

Plug in the USB-C cable to start charging. The battery percentage should appear on the screen.

ADVICE

If you still can’t charge the fan after following the steps above, please contact our support team at www.strongcore.sg/contact.

IMPORTANT: 

Allow the fan to cool for 10 minutes after use before restarting.

✅ Check 1

Unplug and reconnect the charging cable to reset the connection.

✅ Check 2

Slide the power switch up. The battery level should appear on the display if charging is successful.

✅ Check 3

Press the speed button twice to start the fan, then increase the speed level up to 100 to confirm proper operation.

ADVICE

If you’re still experiencing sudden power cuts after completing the steps above, please contact our support team at www.strongcore.sg/contact.

IMPORTANT:

1. Always turn off the fan and unplug it from charging before cleaning.
2. Clean regularly to maintain strong, consistent airflow and peak performance.

◉ Use a cotton swab or soft brush to gently remove dust from the blades.
◉ Avoid applying too much pressure.

Wipe the surface with a dry, lint-free cloth. Do not use water, as it may leave marks or damage the fan.