DOWNLOAD THE USER MANUAL

Please open and download the PDF below to access the user guide.

IMPORTANT

Before first use, please ensure to remove all protective packaging materials, including plastic wraps and protective cardboards.

◉ Fill the measuring cup with clean water maximum 100ml.
◉ The steamer’s water tank holds up to 170ml.

1. Remove the blender from the box and take out all packaging materials inside.

2.Place the Blender Motor Base on a stable, flat surface.

3. Place the Blending Jar onto the Motor Base and twist clockwise until securely locked.

4. The Blade Unit comes pre-attached to the Blending Jar — no assembly required

5. Plug the blender into a dedicated power socket suitable for 220V use.

6. Run the unit empty for 10 seconds before first use to confirm proper operation.

CAUTION:

Ensure the blender is unplugged before assembling any parts. Always handle blades with care — the edges are extremely sharp and may cause injury.

Attach the jar cover to the blending jar.

Attach the cover lid together with the jar cover.

Make sure it is attached securely.

Align the Blending Jar to the Motor Base and twist clockwise until you hear a click — this confirms it is securely locked.

IMPORTANT: 

- Do not overload the blending jar — this may stall the motor.
- Never operate continuously for more than 60 seconds to prevent overheating.
- Cut all ingredients into 2–3 cm pieces for best results.

Inspect the plug and ensure the power cord for any damage.

Always plug into a dedicated 220V power outlet.

Run the unit empty for 10 seconds to test for proper functionality before first use.

Pour ingredients before blending.

Add 100ml of liquid ingredients.
Do not exceed 600ml.
Attach the Jar Cover firmly before blending.

Press the power button to start blending.

IMPORTANT: 

Do not exceed the recommended maximum quantities for each ingredient. Overloading the Glass Bowl may cause the motor to stall or result in uneven grinding.

IMPORTANT:

- If the unit fails to operate, do not force the power button.
- Check all connections and ensure the Jar Cover is properly attached before restarting.
- Add liquid ingredient (e.g., water, milk, or oil) to help the blending process.

• Check the alignment of the Blending Jar to the Motor Base.
• Twist clockwise until firmly locked.

Disconnect and firmly reinsert the power plug, ensuring full contact with the socket.

Add a small amount of liquid ingredient to help the blending process.

Press the power button to restart the unit.

ADVICE

If the Blender doesn’t operate after following the steps above, please contact 
www.strongcore.sg/contact

IMPORTANT:

Never use the Blender on these hard or unsuitable ingredients: These are strictly not recommended.

◉ Ice Cubes

◉ Chocolate Bars

◉ Coffee Beans

◉ Hard Spices

The Blending Jar may be overloaded, causing the motor to stall.

Allow the unit to cool for a minimum of 30 minutes before restarting.

Arrange the ingredients and ensure the total load does not exceed 600ml.

Add a small amount of liquid to help the blending process.

Press the power button to restart the unit.

ADVICE

If the Blender doesn’t operate after following the steps above, please contact
www.strongcore.sg/contact

IMPORTANT:

If the blending performance is poor, switch off and unplug the unit immediately. Do not force the motor — check ingredient size and blade cleanliness before restarting.

Never exceed the 600ml maximum capacity — overloading the Blending Jar may cause uneven results or motor stall.

Add a small amount of liquid to help the blending process.

Cut all ingredients into uniform pieces of approximately 2–3 cm before loading.

Press the power button to restart the unit.

ADVICE

If the Blender doesn’t operate after following the steps above, please contact our support team at www.strongcore.sg/contact

IMPORTANT:

If leakage occurs, switch off and unplug the unit immediately. Do not continue operating until is properly checked reassembled.

Copy of Smoke or unusual odours may occur if grease builds up in the fryer basket or airflow is restricted. Always ensure the basket is clean and air vents are unobstructed before cooking.

Reduce the total volume of ingredients and ensure it does not reach or exceed 600ml to interfere with the blender's normal operation.

Always check that the unit is properly assembled before each use to prevent leakage.

Press the power button to restart the unit.

ADVICE

If the Blender doesn’t operate after following the steps above, please contact our support team at www.strongcore.sg/contact

IMPORTANT:

Never operate the unit continuously for more than 60 seconds. Always allow the motor to cool fully between grinding cycles to prevent overheating.

Copy of Copy of Smoke or unusual odours may occur if grease builds up in the fryer basket or airflow is restricted. Always ensure the basket is clean and air vents are unobstructed before cooking.

The motor unit may have overheated due to prolonged operation beyond the recommended duty cycle.

Disassemble and allow the motor to cool fully in a well-ventilated area for a minimum of 30 minutes.

Food residue might accumulated on the back motor air vents, producing a burning smell when the motor runs

Wipe the exterior of the air vent and motor base with a lightly dampened cloth — ensure no moisture enters the motor vents.

ADVICE

If the Blender doesn’t operate after following the steps above, please contact our support team at www.strongcore.sg/contact